未分类
实现Openwrt路由器智能翻墙
openwrt固件实现智能翻墙 国庆放假前几天一直在家折腾路由器自动翻墙, 固件刷了好几遍, 虽然最后也没成功, 还是记录下配置过程, 以后再想做时用得着. 我的路由器是Netgear R6100, 去 https://wiki.openwrt.org/toh/hwdata/netgear/netgear_r6100 查到路由器信息, 安装 安装软件有三种方法, 一, 通过配置源在线安装; 二, 通过脚本安装. 三, 通过下载安装包安装; 一, 最简单的就是通过源安装: 由于openwrt-dist.sourceforge.net源不翻墙的话不能用, 会有bad address的错误提示, 实际配置需要配置反代源, 参考了 http://openwrt-dist.colendres.com/ , 最后配置如下: First, add openwrt-dist.pub file into opkg’s keys:
|
1 2 |
wget http://openwrt-dist.sourceforge.net/packages/openwrt-dist.pub opkg-key add openwrt-dist.pub |
添加如下到/etc/opkg.conf, 注意将签名验证给注释掉
|
1 2 3 |
src/gz openwrt_dist http://openwrt-dist.colendres.com/packages/OpenWrt/base/ar71xx #或src/gz openwrt_dist http://openwrt-dist.colendres.com/packages/OpenWrt/base/{architecture} src/gz openwrt_dist_luci http://openwrt-dist.colendres.com/packages/OpenWrt/luci |
然后安装相应软件:
|
1 2 3 4 5 6 7 8 9 10 11 |
opkg update opkg install iptables-mod-nat-extra iptables-mod-tproxy ipset opkg remove dnsmasq && opkg install dnsmasq-full opkg install ChinaDNS opkg install luci-app-chinadns opkg install dns-forwarder opkg install luci-app-dns-forwarder opkg install shadowsocks-libev opkg install luci-app-shadowsocks opkg install ShadowVPN opkg install luci-app-shadowvpn |
注: 每次路由器重启后, 都要先opkg update下才能安装软件 二, 通过脚本安装
|
1 2 3 |
wget http://openwrt-dist.colendres.com/auto_install_openwrt.sh chmod +x auto_install_openwrt.sh ./auto_install_openwrt.sh |
三, 下载所有安装包然后opkg install 安装 Read more…